LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1981 >> RX-7 GSL, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> RX-7 Rotary Engine >> Engine Reassembly >> Flywheel Counterweight Installation >> Man. Trans.

Man. Trans.

  1. Apply engine oil to oil seal in the rear housing. Mount flywheel to rear end of eccentric shaft so that key fits into flywheel keyway. Apply sealing agent to lock nut surface that contacts flywheel and install lock nut. Hold flywheel with ring gear brake (49 1881 060) and tighten lock nut.
  2. Hold clutch disc in position with clutch disc centering tool (49 0813 310). Mount clutch cover and pressure plate assembly on flywheel and align the "0" marks of clutch cover and flywheel. Install 4 standard and 2 reamer bolts finger tight. To avoid distortion of pressure plate cover, tighten bolts in steps, a few turns at a time, until all are tight.
scientia non olet · About LEMON Manuals