Richer Solenoid (Man. Trans. Only)
- Connect a tachometer to engine and warm engine to normal operating temperature. Disconnect coupler from solenoid and connect voltmeter to terminal of wiring harness.
- Start engine and increase engine speed to 3000 RPM, using throttle. Quickly release throttle lever and note speed at which current stops flowing to terminal. It should be 1050-1250 RPM. Remove voltmeter. Reconnect coupler.
- With engine at idle speed, disconnect coupler at richer solenoid. Engine should continue to operate smoothly. Apply battery voltage to richer solenoid connection. Engine should operate roughly or stall.