LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1980 >> RX-7 S, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Auxiliary Controls >> Testing >> Full Choke Switch

Full Choke Switch

  1. Disconnect coupler from choke switch. Check continuity between numbered terminals in coupler, using an ohmmeter.
  2. Continuity should exist between No. 4 and No. 5 terminals when choke knob is pulled out about 1" (25 mm).
    Fig 1: Coupler Terminal Locations for Testing Choke and Full Choke Switches
    G09324585Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals