LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1978 >> Cosmo Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> RX-4 & COSMO Rotary Engine >> Engine Assembly >> Flywheel Counterweight Installation >> With Man. Trans.

With Man. Trans.

  1. Apply lubricant to oil seal in rear housing. Mount flywheel to rear end of eccentric shaft so that key fits into flywheel keyway. Apply sealing agent to both sides of flywheel lock washer, and place washer in position. Fit lock nut by fingers. Hold flywheel with suitable ring gear brake tool (49 1881 060) and tighten lock nut to 289-362 ft. lbs. (40-50 mkg). Bend up lock tabs on washer.
  2. Hold clutch disc in position with clutch disc centering tool (49 0813 310). Mount clutch cover and pressure plate assembly on flywheel and align the "0" marks of clutch cover and flywheel. Install 4 standard and 2 reamer bolts finger tight. To avoid distortion of pressure plate cover, tighten bolts in steps, a few turns at a time, until all are tight. Torque bolts to 13-20 ft. lbs. (1.8-2.7 mkg).
scientia non olet · About LEMON Manuals