LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1973 >> RX-2 Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> MAZDA Engines - Rotary Piston Engine >> Engine Assembly >> Flywheel Installation

Flywheel Installation

  1. Apply oil to sealing lip of rear oil seal and install flywheel. Apply sealer to both sides of lock washer and apply a locking agent to threads on eccentric shaft. Install flywheel retaining nut.
  2. Secure flywheel with a suitable holding tool (49 0820 060A) and tighten flywheel nut to specification. Secure nut by bending tab over on lock washer.
scientia non olet · About LEMON Manuals