LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1972 >> 1200 Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> MAZDA Engines >> Thrust Bearing Alignment

Thrust Bearing Alignment

  1. Push forward on crankshaft with a lever. Mount a dial indicator at end of crankshaft and measure endplay. If endplay is over 0.12", install suitable thrust washers to obtain specified crankshaft endplay. Thrust washers are available in 0.010", 0.020" & 0.030" oversizes.
  2. With crankshaft removed, install lower thrust washer half of correct size in crankcase with oil grooves out. Install upper thrust washer half with rear main bearing cap with oil grooves out. Recheck crankshaft endplay.
scientia non olet · About LEMON Manuals