LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2021 >> Nautilus Reserve, 2.7L Eng VIN P >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - 2.7L ECOBOOST (238KW/324PS) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Removal

Engine Coolant Temperature (ECT) Sensor: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the coolant outlet connector. Refer to: COOLANT OUTLET CONNECTOR
  2. Disconnect the ECT sensor electrical connector.
    GFD619708Courtesy of FORD MOTOR COMPANY
  3. NOTE: Do not reuse the ECT sensor, install a new sensor.

    Remove and discard the ECT sensor.

    Torque: 142 lb.in (16 Nm)

GFD619709Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals