DTC U2017: Control Module Software #2 Supervision Software Failure: Description

WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

When the battery voltage to the PSCM is greater than 6 volts with the ignition ON and there are no DTCs present, the PSCM runs a self-test of the system software. If an error is detected, a DTC is set and the EPAS enters into a limited operation mode.

DTC U2017:48 (Control Module Software #2: Supervision Software Failure) - Sets due to an internal error in the PSCM.