Section 1 (Four-Wheel Drive Systems)
WARNING: This page is about a different variant/trim than selected.
- Description And Operation
- Diagnosis And Testing
- Four-Wheel Drive Systems - Vehicles With: 1-Speed Torque On Demand Transfer Case
- Inspection and Verification
- DTC Charts
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : Four-Wheel Drive (4WD) System Functional Test
- Pinpoint Test B : DTC U300D:11
- Pinpoint Test C : DTCS P0562:00, P0563:00
- Pinpoint Test D : IWE Solenoid - Electrical Fault
- Pinpoint Test E : The Front Axle Does Not Engage/Disengage Correctly
- Pinpoint Test F : Four-Wheel Drive (4WD) Clutch Field Coil - Electrical
- Pinpoint Test G : U0100:00
- Pinpoint Test H : DTC U0101:00
- Pinpoint Test I : U0138:00
- Pinpoint Test J : U0140:00
- Pinpoint Test K : U0121:00
- Pinpoint Test L : U0140:00
- Pinpoint Test M : The Front Axle Makes Noise In 2H Mode Only And Generally Under Heavy Throttle
- Four-Wheel Drive Systems - Vehicles With: 2-Speed Torque On Demand Transfer Case
- Inspection and Verification
- DTC Charts
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : Four-Wheel Drive (4WD) System Functional Test
- Pinpoint Test B : DTC U300D:11
- Pinpoint Test C : DTCS P0562:00, P0563:00
- Pinpoint Test D : IWE Solenoid - Electrical Fault
- Pinpoint Test E : The Front Axle Does Not Engage/Disengage Correctly
- Pinpoint Test F : Four-Wheel Drive (4WD) Clutch Field Coil - Electrical
- Pinpoint Test G : Shift Motor - Electrical Or Mechanical Fault
- Pinpoint Test H : U0100:00
- Pinpoint Test I : DTC U0101:00
- Pinpoint Test J : U0138:00
- Pinpoint Test K : U0140:00
- Pinpoint Test L : U0121:00
- Pinpoint Test M : U0140:00
- Pinpoint Test N : DTC U0155:00
- Pinpoint Test O : The Front Axle Makes Noise In 2H Mode Only And Generally Under Heavy Throttle
- Four-Wheel Drive Systems - Vehicles With: 1-Speed Torque On Demand Transfer Case
- General Procedures
- Removal And Installation