Pinpoint Test M : U0140:00: Notes
Normal Operation
The TCCM sets the DTC U0155 when key messages are not received for longer than 5 seconds. This loss of key messages degrades the 4x4 system performance and/or inability to change 4x4 modes. Other modules that require data from the IPC module all set communication DTCs and may also exhibit system function concerns.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC): No Sub Type Information | Sets in continuous memory in the TCCM if IPC data messages received from the IPC over the HS-CAN are missing for longer than 5 seconds. |
U0140:00
Refer to Wiring Diagram Four Wheel Drive Systems for schematic and connector information.
Normal Operation and Fault Conditions
Terrain Management Module DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Sets in continuous memory in the ATCM if data messages received from the BCM through the GWM are missing for 5 seconds or longer. |
Possible Sources
- Communication concern.
- GWM concern.
- BCM
- ATCM