Pinpoint Test C : DTC U0155: Notes
DTC U0155
Refer to Wiring Diagram Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The IPC, GSM and BCM use information contained in messages on the HS-CAN.
NOTE:
If a GSM self-test is performed, make sure the drivers door is closed and locked.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | This DTC sets if the GSM does not receive some or all of an expected message from the IPC. |
Possible Sources
- Connectors damaged or pushed-out terminals, circuitry open, shorted to power or shorted to ground
- BCM fuse 13 (7.5A)
- IPC