Front Toe Adjustment
WARNING: This page is about a different car, the 2017 Ford Police Interceptor Utility and 2017 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Special Tool(s) / General Equipment
| Steering Wheel Holder |
|---|
| Wheel Alignment System |
Adjustment
NOTE:
Make sure that the vehicle is standing on a level surface.
- 2.
Using alignment equipment and the manufacturer's instructions, check the front toe setting on both sides.Use the General Equipment: Wheel Alignment System
- 3.
- 1.
On both sides. Loosen the tie rod end jamb nut.Torque
: 46 lb.ft (63 Nm)
- 2.
On both sides. Position aside the steering gear boot clamp.
- 3.NOTE: Do not allow the steering gear bellows to twist when the inner tie rod is rotated.
On both sides. Rotate the inner tie rod until the toe reading is within specifications.
- 1.