LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 683 (Seating System - Front) >> Removal And Installation >> Driver Front Seat Module (DSM) >> Installation

Driver Front Seat Module (DSM): Installation

WARNING: This page is about a different car, the 2017 Ford Police Interceptor Utility and 2017 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the DSM following the on-screen instructions.

  1. 3.

    NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the SCME following the on-screen instructions.

  1. 4.

    NOTE: This step is only necessary when installing a new component.

    Operate the seat in all directions through the full range of travel to set the soft stops.

  1. 5.

    NOTE: This step is only necessary when installing a new component.

    If equipped with memory adjustable pedals, operate the adjustable pedals in both directions through the full range of travel to set the soft stops.

  1. 6.

    NOTE: This step is only necessary when installing a new component.

    If equipped with memory adjustable steering column, operate the steering column in all directions through the full range of travel to set the soft stops.

scientia non olet · About LEMON Manuals