LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Automatic Transaxle Control System) >> Repair procedures >> Adjustment >> TCM learning procedure

TCM learning procedure

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Automatic Transaxle Fluid (ATF) temperature: 40~100°C (104~212°F)
  2. Static learning

    Repeat the below shift pattern four times or more with stepping on the brake.

    Fig 1: Transaxle Control Module Learning Diagram
    G09886204Courtesy of HYUNDAI MOTOR AMERICA
  3. Driving learning

    Drive the vehicle from a stop in D through all gears 1st, 2nd, 3rd, 4th, 5th and 6th gear while holding the throttle steady at the specified Throttle Position Sensor (TPS) value (15~25%).

scientia non olet · About LEMON Manuals