LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1727 (Module Communications Network (Except Electric)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test Y : The PSCM (Power Steering Control Module) Does Not Respond To The Scan Tool >> Notes

Pinpoint Test Y : The PSCM (Power Steering Control Module) Does Not Respond To The Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Refer to Module Communications Network for schematic and connector information.

Refer to Power Steering Controls for schematic and connector information.

Normal Operation and Fault Conditions 

The PSCM communicates with the scan tool through the HS-CAN.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify high current BJB fuse 1 (80A) and BJB fuse 40 (5A) are OK.

scientia non olet · About LEMON Manuals