LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1727 (Module Communications Network (Except Electric)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test X : The AWD (All-Wheel Drive) Module Does Not Respond To The Scan Tool >> Notes

Pinpoint Test X : The AWD (All-Wheel Drive) Module Does Not Respond To The Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Refer to Module Communications Network for schematic and connector information.

Refer to Transmission Controls - DPS6 for schematic and connector information.

Normal Operation and Fault Conditions 

The AWD module communicates with the scan tool through the HS-CAN.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BJB fuse 17A (30A) and BCM fuse 85 (7.5A) are OK.

scientia non olet · About LEMON Manuals