Pinpoint Test Q : The SODL (Side Obstacle Detection Control Module LH) Or SODR (Side Obstacle Detection Control Module RH) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The SODL and SODR communicate with the diagnostic scan tool through an extended MS-CAN to the BCM. The BCM translates the messages to the diagnostic scan tool.
Possible Causes
- Fuse
- Wiring, terminals and connector
- BCM
- SODL
- SODR
Visual Inspection and Diagnostic Pre-checks
Verify BJB fuse 29 (5A) is OK.