Pinpoint Test K : The ACM (Audio Front Control Module) Does Not Respond To The Scan Tool: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Refer to Module Communications Network for schematic and connector information.
Refer to Audio System/Navigation for schematic and connector information.
Normal Operation and Fault Conditions
The ACM communicates with the scan tool through the MS-CAN. The IPC is used as the gateway module.
Possible Sources
- Fuse
- Wiring, terminals and connector
- ACM
Visual Inspection and Diagnostic Pre-checks
Verify BCM fuse 79 (15A) is OK.