LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System) >> Variable Charge Motion Actuator (VCMA) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Identifying VCMA Connector
    G09885965Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Identifying VCMA And Bolts
    G09885966Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals