LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1040 (Adaptive Steering System Component Testing) >> Pinpoint Tests >> Pinpoint Tests I: SECM Motor Concern >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2018 Lincoln MKX, 2018 Lincoln Continental, 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, and 2018 Ford F-350 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the SECM monitors various inputs to determine if the motor is operating correctly. 

SECM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C100B:62 Motor Drive Current: Signal Compare Failure Sets when the SECM detects the electrical current required to drive the adaptive steering motor does not match what is expected. This DTC setting multiple times is a trigger condition for DTC U3000:96.
C100C:63 Steering Tracking: Circuit/Component Protection Time- Out Sets when the SECM detects the steering angle offset (clear vision) is too great for the SECM to compensate.
U3000:68 Control Module: Event Information Sets when the SECM detects an internal fault.
U3000:98 Control Module: Component or System Over Temperature Sets when the SECM detects an internal fault.
scientia non olet · About LEMON Manuals