DTC U0401: Invalid Data Received from ECM/PCM "A"
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2018 Lincoln MKX, 2018 Lincoln Continental, 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, and 2018 Ford F-350 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Failure | Action |
|---|---|
| 00 | This DTC sets if the SECM receives invalid data in any of the PCM messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the appropriate Electronic Engine Controls article or appropriate Module Communications Network article. If the diagnostic scan tool cannot communicate with the PCM or the GWM, REFER to appropriate Module Communications Network article. If no DTCs are set in the PCM or GWM, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary. |
| 81 | This DTC sets if the SECM receives invalid data in any of the PCM messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the appropriate Electronic Engine Controls article or appropriate Module Communications Network article. If the diagnostic scan tool cannot communicate with the PCM or the GWM, REFER to appropriate Module Communications Network article. If no DTCs are set in the PCM or GWM, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary. |
| 82 | This DTC sets if the SECM receives invalid data in any of the PCM messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the appropriate Electronic Engine Controls article or appropriate Module Communications Network article. If the diagnostic scan tool cannot communicate with the PCM or the GWM, REFER to appropriate Module Communications Network article. If no DTCs are set in the PCM or GWM, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary. |
| 83 | This DTC sets if the SECM receives invalid data in any of the PCM messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the appropriate Electronic Engine Controls article or appropriate Module Communications Network article. If the diagnostic scan tool cannot communicate with the PCM or the GWM, REFER to appropriate Module Communications Network article. If no DTCs are set in the PCM or GWM, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary. |