| Accelerator pedal position |
PCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module of the current position of the accelerator pedal, 0-100%. |
| Brake on-off switch |
PCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module the driver has pressed the brake pedal. |
| Driven wheel propulsion torque |
PCM |
This message is sent to the GWM and then to the ABS module. This message provides the ABS module of the current amount of propelling torque being applied to the driven wheels by the engine or electric motor. |
| Driver door ajar status |
BCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module the driver door status, closed or open. |
| Driver seat belt buckle status |
RCM |
This message informs the ABS module of the current status of the driver seat belt buckle; buckled, unbuckled, faulty or unknown. |
| Engine off time |
PCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module how long, in seconds, the engine has been off. |
| Engine Revolutions Per Minute (RPM) |
PCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module of the current engine Revolutions Per Minute (RPM). |
| Gear lever position |
TCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module of the current gear selector lever position. |
| Ignition status |
BCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module of the current ignition status; off, accessory, run, start, invalid or unknown. |
| Key in ignition status |
BCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module of the current ignition key status; in or out. |
| Longitudinal acceleration |
RCM |
The ABS module uses this message to confirm forward or rearward vehicle movement. |
| Transmission in REVERSE |
PCM |
This message is sent to the GWM and then to the ABS module. This message informs the ABS module of the current reverse gear status; inactive or active. |
| Vehicle configuration data |
BCM |
This message is sent to the GWM and then to the ABS module. This message provides the ABS module with the current optional and configured items such as tire size, axle ratio, keyless entry and VIN. |