| B108A:01 |
Start Button: General Electrical Failure |
GO to Pinpoint Test A |
| B108A:24 |
Start Button: Signal Stuck High |
GO to Pinpoint Test A |
| B108A:9E |
Start Button: Stuck On |
GO to Pinpoint Test A |
| B1142:29 |
Ignition Status 1: Signal Invalid |
GO to Pinpoint Test A |
| B1240:11 |
Start Button Mode Indicator: Circuit Short to Ground |
GO to Pinpoint Test B |
| B1240:15 |
Start Button Mode Indicator: Circuit Short to Battery or Open |
If the ignition mode indicator is inoperative, GO to Pinpoint Test B
If the ignition mode indicator is always on, GO to Pinpoint Test C |
| B130F:12 |
Run Accessory Control: Circuit Short to Battery |
REFER to: Wipers and Washers
. |
| B130F:14 |
Run Accessory Control: Circuit Short to Ground or Open |
REFER to: Wipers and Washers
. |
| B1310:12 |
Run/Start Control: Circuit Short to Battery |
GO to Pinpoint Test A |
| B1310:14 |
Run/Start Control: Circuit Short to Ground or Open |
GO to Pinpoint Test A |
| All other Diagnostic Trouble Codes (DTCs) |
- |
REFER to: Body Control Module (BCM)
. |