Pinpoint Test M : DTC U0151: Notes
DTC U0151
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The RCM and the GSM and use information contained in messages on the HS-CAN.
NOTE:
If a GSM self-test is to be performed, make sure the drivers door is closed and locked.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0151 | Lost Communication With Restraints Control Module | This DTC sets if the GSM does not receive some or all of an expected message from the RCM. |
Possible Sources
- Connectors damaged or pushed-out terminals, circuitry open, shorted to power or shorted to ground
- BJB fuse 35 (5A)
- RCM