Pinpoint Test J : DTC U0103: Notes
DTC U0103
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The GSM and TRCM communicate on the High Speed 2 CAN. The PCM is on the High Speed 1 CAN. The GWM information from HS2 CAN to information from HS1 CAN.
NOTE:
If a GSM self-test is to be performed, make sure the drivers door is closed and locked.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0103 | Lost Communication With Gear Shift Control Module "A" | This DTC sets if the PCM lost communication with the GSM. |
Possible Sources
- Connectors damaged or pushed-out terminals, circuitry open, shorted to power or shorted to ground
- BCM fuse 12 (5A)
- GSM
- GWM