LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> Navigator Select, 4WD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine Testing >> Pinpoint Tests >> Pinpoint Test BO: Clutch Pedal Input Concern >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

When the driver presses the clutch pedal, the clutch pedal switch sends a signal to the PCM indicating the pedal has been pressed. The PCM sends a clutch pedal message to the GWM over the HS-CAN1. The GWM sends this message to the ABS module over the HS-CAN2. The ABS module monitors the clutch pedal message and vehicle speed. If the information indicates a concern with the clutch pedal, this DTC is set. 

PPT BO ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description PPT AC ABS Module DTC Fault Trigger Conditions
C1A41:64 Clutch Pedal Sensor: Signal Plausibility Failure This DTC sets under a specific driving condition; if the vehicle is moving less than 3 km/h (2 mph) and after vehicle speed is greater than 80 km/h (49 mph) in the same ignition cycle, a clutch pedal signal change is expected to occur. If the clutch pedal signal change does not occur for 5 times, this DTC sets.
scientia non olet · About LEMON Manuals