LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> Navigator Select, 4WD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine Testing >> Pinpoint Tests >> Pinpoint Test BL: SASM Ignition Input Circuit Fault >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

The SASM requires an operating voltage between 8 and 17 volts. The SASM receives fused ignition voltage from the BCM run-start bus. The SASM sets this DTC if there is excessive resistance or an open in this circuit, including an open fuse. 

PPT BL SASM DTC FAULT TRIGGER CONDITION TABLE

DTC Description Fault Trigger Conditions
U3011:13 Ignition Input Off: Circuit Open This DTC sets if the ignition voltage supplied to the SASM is below 6 volts for more than one second.
scientia non olet · About LEMON Manuals