LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (Electronic Engine Controls) >> Removal And Installation >> Intake Air Temperature (IAT) Sensor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
  2. Remove the IAT sensor.
    • Lift the tab and turn the IAT sensor counterclockwise to remove.
    GFD92942Courtesy of FORD MOTOR COMPANY
  3. To install, reverse the removal procedure.
    • Make sure the IAT sensor tab is fully seated during installation.
scientia non olet · About LEMON Manuals