LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Abs Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Test T: SASM Communication Concern With BCM >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the BCM sends messages to the SASM over the HS-CAN. If the SASM does not receive these messages within the specified time frame, the module sets a DTC. This can be due to a BCM failure, a circuit failure on the HS-CAN or an excessive load on the network. For information on the cruise control messages sent to the SASM by the BCM, refer the  DESCRIPTION AND OPERATION  . 

PPT T SASM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0140:00 Lost Communication With Body Control Module: No Sub Type Information Sets when the SASM does not receive any messages from the BCM.
scientia non olet · About LEMON Manuals