Catalyst Monitor Sensor 3.5L GTDI: Installation
WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
RH sensor
- Apply the specified lubricant to the specified component. High Temperature Nickel Anti-Seize Lubricant XL-2. Special Tool(s): Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A).
- Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formulas below.
- Tighten to 48 Nm (35 lb-ft).
- Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formulas below.
- Apply the specified lubricant to the specified component. High Temperature Nickel Anti-Seize Lubricant XL-2. Special Tool(s): Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A).
- Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formulas below.
- Tighten to 48 Nm (35 lb-ft).
- Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formulas below.
LH sensor
Both sensors