Front Brake Caliper: Installation

WARNING: This page is about a different car, the 2017 Ford Police Interceptor Utility and 2017 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

1.

NOTE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.

To install, reverse the removal procedure.

2.

Lubricate the brake caliper flow bolt threads and new washers with clean specified brake fluid before installing the brake caliper flow bolt into the brake caliper.
Material: Motorcraft ® DOT 4 LV High Performance Motor Vehicle Brake Fluid / PM-20 (WSS-M6C65-A2)

3.

Bleed the brake system. Refer to: Brake System Pressure Bleeding .