Ignition Coil-On-Plug: Removal

1.

Remove the oil filler cap and remove the engine appearance cover. Install the oil filler cap.

GFD135669

Courtesy of FORD MOTOR COMPANY

2.

NOTE: When removing or installing the fuel injection pump noise insulator, spreading the openings will reduce the risk of damage.

Remove the fuel injection pump noise insulator.

GFD135681

Courtesy of FORD MOTOR COMPANY

3.

Disconnect the ignition coil-on-plug electrical connectors and the high-pressure fuel pump electrical connector.

GFD135820

Courtesy of FORD MOTOR COMPANY

4.

NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.

Remove the ignition coil-on-plug mounting bolts and remove the ignition coil-on-plugs.

GFD135821

Courtesy of FORD MOTOR COMPANY