Remove the halfshaft from the vehicle. Refer to Halfshaft .
2.
Remove the 2 boot clamps.
Courtesy of FORD MOTOR COMPANY
3.
Separate the boot from the inboard CV joint housing.
Courtesy of FORD MOTOR COMPANY
4.
Remove the retaining ring.
Courtesy of FORD MOTOR COMPANY
5.
Remove the inboard CV joint housing.
Courtesy of FORD MOTOR COMPANY
6.
Index-mark the inner race and ball cage.
Courtesy of FORD MOTOR COMPANY
7.
Remove the 6 balls.
Courtesy of FORD MOTOR COMPANY
8.
Remove the snap ring.
Courtesy of FORD MOTOR COMPANY
9.
Remove the inner race and the ball cage.
Courtesy of FORD MOTOR COMPANY
10.
Remove the inboard boot.
Courtesy of FORD MOTOR COMPANY
11.
Remove the 2 boot clamps.
Courtesy of FORD MOTOR COMPANY
12.
Remove the outboard boot.
Courtesy of FORD MOTOR COMPANY
13.
NOTE:
If the grease is contaminated, clean and inspect the joint for wear. Install a new outboard CV joint and interconnecting shaft assembly if worn/damaged.