Voltage Converter/Inverter DTCS
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1330:01 | DC/AC Inverter Module: General Electrical Failure | GO to Pinpoint Test A |
| B1330:02 | DC/AC Inverter Module: General Signal Failure | GO to Pinpoint Test C |
| B1330:08 | DC/AC Inverter Module: Bus Signal / Message Failure | GO to Pinpoint Test C |
| B1330:49 | DC/AC Inverter Module: Internal Electronic Failure | CLEAR the DTC. REPEAT the self-test. If DTC B1330:49 is retrieved again, INSTALL a new Direct Current/Alternating Current (DC/AC) Inverter. REFER to: Direct Current/Alternating Current (DC/AC) Inverter . |
| B1330:55 | DC/AC Inverter Module: Not Configured | CLEAR the DTC. REPEAT the self-test. If DTC B1330:55 is retrieved again, INSTALL a new Direct Current/Alternating Current (DC/AC) Inverter. REFER to: Direct Current/Alternating Current (DC/AC) Inverter . |
| B1330:9A | DC/AC Inverter Module: Component or System Operating Conditions | ADDRESS all other Diagnostic Trouble Codes (DTCs) first. If no other Diagnostic Trouble Codes (DTCs) are present ADDRESS any symptoms. REFER to Symptom Chart: Direct Current/Alternating Current (DC/AC) Inverter . If no symptoms are present clear the DTC. If the DTC returns and no symptoms are present INSTALL a new Direct Current/Alternating Current (DC/AC) Inverter. REFER to: Direct Current/Alternating Current (DC/AC) Inverter . |
| All Other DTCs | - | REFER to: Body Control Module (BCM) . |