Pinpoint Test AM: DTC B19A6: Notes

Refer to Climate Controlled Seats for schematic and connector information.

Normal Operation 

The DCSM supplies a speed control signal voltage to the passenger seat backrest TED on circuit CHS09 (GY). The TED blower is supplied operating voltage from DCSM output circuit CHS14 (GN) and ground from DCSM output circuit CHS08 (BN/YE).

• DTC B19A6 (Passenger Seat Back Blower Speed Short to Ground) - If the passenger seat backrest blower speed circuit is shorted to ground, the DCSM will shut down the passenger seat system and set this DTC.

This pinpoint test is intended to diagnose the following: 

• Wiring, terminals or connectors
• TED and blower assembly
• DCSM