Selector Lever Knob: Removal

Expedition 

1. 1.
   
   Remove the selector lever trim ring and the console tray insert.

Courtesy of FORD MOTOR COMPANY

1. 2.
   
   Remove the screw, raise the console upper trim panel and disconnect the ambient light electrical connector and remove the trim panel.

Courtesy of FORD MOTOR COMPANY

Navigator 

1. 3.
   
   Remove the selector lever trim ring.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   Raise the console upper trim panel and disconnect the ambient light electrical connector and remove the trim panel.

Courtesy of FORD MOTOR COMPANY

All vehicles 

1. 5.
   
   Remove the RH selector lever knob cover.

   1. 1.
      
      Start at the bottom front only.

   1. 2.
      
      Move towards the top front and remove the cover.

Courtesy of FORD MOTOR COMPANY

1. 6.
   
   Remove the LH selector lever knob cover.

   1. 1.
      
      Start at the bottom front only.

   1. 2.
      
      Move towards the top front and remove the cover.

Courtesy of FORD MOTOR COMPANY

1. 7.
   
   Remove and discard the RH selector lever knob screw.

Courtesy of FORD MOTOR COMPANY

1. 8.
   
   Remove and discard the LH selector lever knob screw.

Courtesy of FORD MOTOR COMPANY

1. 9.
   
   Remove the bolts and position the selector lever aside.

Courtesy of FORD MOTOR COMPANY

1. 10.
   
   Disconnect the SelectShift® switch and TC switch electrical connectors.

Courtesy of FORD MOTOR COMPANY

1. 11.
   
   Remove the selector lever knob.

Courtesy of FORD MOTOR COMPANY