LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2016 >> Navigator Select, 4WD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - 6R80 >> Disassembly And Assembly Of Subassemblies >> Forward Overdrive Clutch Assembly - Assembly

Forward Overdrive Clutch Assembly - Assembly

SPECIAL TOOL(S)

GFD31049Courtesy of FORD MOTOR COMPANY
 End Play Gauge, Clutch 307-555
MATERIAL

Item Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada) MERCON® LV

Assembly 

  1. 1.

    Position the forward clutch assembly in the Clutch End Play Gauge and install the overdrive clutch pack onto the forward clutch and planetary gear set.
GFD31112Courtesy of FORD MOTOR COMPANY

  1. 2.

    Install the intermediate shaft assembly.
GFD31113Courtesy of FORD MOTOR COMPANY

  1. 3.

    NOTE: Inspect and install new thrust bearings as required.

    Install the T4 intermediate shaft bearing.

GFD31114Courtesy of FORD MOTOR COMPANY

  1. 4.

    Install the forward clutch hub and sun shaft assembly.
GFD31054Courtesy of FORD MOTOR COMPANY

  1. 5.

    Install a new the direct clutch hub.
GFD31053Courtesy of FORD MOTOR COMPANY

  1. 6.

    NOTE: Do not install the snap ring on the forward clutch hub with the snap ring gap in the same position as the original snap ring or damage to the transmission can occur.

    Install a new direct clutch outer shell retaining ring with the snap ring gap positioned approximately 120 degrees from the index mark made on the forward clutch hub during disassembly.

    1. 1.

      New snap ring gap

    1. 2.

      Index mark from original snap ring gap
GFD31115Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals