LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2016 >> MKT Base, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Removal And Installation >> Generator - 2.0L GTDI >> Installation

Generator - 2.0L GTDI: Installation

  1. 1.

    Position the generator and hand-tighten the 3 bolts. Tighten in the sequence shown.
    • Tighten to 25 Nm (18 lb-ft).
Fig 1: Generator Tightening Sequence
GFD94695Courtesy of FORD MOTOR COMPANY

  1. 2.

    • Tighten to 15 Nm (133 lb-in).
GFD94696Courtesy of FORD MOTOR COMPANY

  1. 3.

    • Tighten to 17 Nm (150 lb-in).
GFD94692Courtesy of FORD MOTOR COMPANY

  1. 4.

    Install the upper Charge Air Cooler (CAC) pipe. Refer to Intake Air Distribution and Filtering .

  1. 5.

GFD94697Courtesy of FORD MOTOR COMPANY

  1. 6.

    Connect the battery. Refer to Battery, Mounting and Cables .
scientia non olet · About LEMON Manuals