Seat Backrest Heater Mat - Second Row, 40 Percent: Removal

NOTE: The heater mat is not designed to be separated from the foam pad. Doing so will damage the foam pad. Install a new foam pad and heater mat. Failure to follow this instruction can result in seat component damage and system failure.

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row in this service information.

1.

Remove the backrest cover. For additional information, refer to Seat Backrest Cover - Second Row, 40 Percent in this service information.

2.

Lift the backrest foam pad away from the backrest frame, cut the tie strap, disconnect the backrest heater mat electrical connector and detach the retainer. Discard the backrest foam pad and heater mat.