Exterior Mirror Glass: Installation

1.

Connect the electrical connectors.

2.

Position the exterior mirror glass onto the exterior mirror motor.

3.

WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

NOTE: Apply hand pressure directly over the center of the exterior mirror glass. Failure to follow this instruction may result in glass breakage.

Place a hand against the back of the exterior mirror and a hand flat against the exterior mirror glass.
- Position the exterior mirror glass to the full lower inboard position and press the exterior mirror glass to fully seat the retaining tab onto the exterior mirror motor.
- Position the exterior mirror glass to the full lower outboard position and press the exterior mirror glass to fully seat the retaining tab onto the exterior mirror motor.
- Position the exterior mirror glass to the full upper outboard position and press the exterior mirror glass to fully seat the retaining tab onto the exterior mirror motor.