Key Programming - Enable Disable Spare Key Programming

Special Tool(s)

Courtesy of FORD MOTOR COMPANY

Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool

NOTE: This procedure provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature and Key Programming - Program a Key Using Two Programmed Keys . If spare key programming is disabled, spare keys can only be programmed by using the Key Programming Using Diagnostic Equipment  procedure.

• 1.
  
  Turn the ignition from the OFF position to the RUN position.

• 2.
  
  From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to enter PATS security access.

• 3.
  
  From the scan tool menu select "Customer Spare Key Programming Enable" or "Customer Spare Key Programming Disable" and follow the IDS on-screen instructions.