Programming the Auto-Unlock Feature Using the Keyless Entry Keypad

NOTE: The auto-unlock feature can be activated or deactivated independently of the autolock feature.

NOTE: The auto-unlock feature of the SJB can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to Module Configuration .

1.

Turn the ignition key to the OFF position and close all vehicle doors.

2.

Enter the factory set 5-digit keyless entry keypad code.

3.

Press and hold the 3/4 button on the keypad. While holding the 3/4 button, press and release the 7/8 button. While still holding the 3/4 button, press and release the 7/8 button a second time.

4.

Release the 3/4 button. The horn chirps once if auto-unlock is disabled or twice (one short chirp followed by a honk) if auto-unlock is enabled.