Program Additional Ignition Key - With Intelligent Access (IA)

NOTE: To enter PATS security access if no programmed Intelligent Access (IA) keys are available, start a vehicle session using a tear tag or PCM part number. Refer to Inspection and Verification in Module Communications Network to start a session. PATS security access can still be granted even with the ignition off.

1.

Insert the unprogrammed IA key into the backup slot.

2.

From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to enter PATS security access.

3.

From the scan tool menu select "Program additional ignition key" and follow the IDS on-screen instructions.

4.

NOTE: The engine will not start until there are at least 2 keys programmed.

The engine should now start with the IA key.

5.

If it is desired to program an additional key (only up to 4 keys total can be programmed), repeat Step 3 for the additional key that needs to be programmed.