| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
GO to Pinpoint Test V . |
| U0184:00 |
Lost Communication With Radio: No Sub Type Information |
GO to Pinpoint Test X . |
| U0256:00 |
Lost Communication With Front Controls Interface Module "A": No Sub Type Information |
GO to Pinpoint Test AB . |
| U201A:51 |
Control Module Main Calibration Data: Not Programmed |
REFER to
Module Configuration
. |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
REFER to
Module Configuration
. |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
REFER to
Module Configuration
. |
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new Front Control/Display Interface Module (FCDIM). REFER to Front Controls/Display Interface Module (FCDIM) . REPEAT the self-test. |
| U3000:42 |
Control Module: General Memory Failure |
CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new audio FCDIM. REFER to Front Controls/Display Interface Module (FCDIM) . REPEAT the self-test. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to Pinpoint Test AD . |
| U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to Pinpoint Test AE . |