Throttle Position (TP) Sensor - 3.5L GTDI: Installation

1.

NOTE: When installing the new TP sensor, make sure that the radial locator tab on the TP sensor is aligned with the radial locator hole on the ETB.

NOTE: Do not use power tools.

Install the new TP sensor.
- Using hand tools, install the 2 new bolts.
  - Tighten to 3 Nm (27 lb-in).

GFD92960

Courtesy of FORD MOTOR COMPANY

2.

Connect the TP sensor electrical connector.

GFD92958

Courtesy of FORD MOTOR COMPANY

3.

Install the CAC outlet pipe. Refer to Intake Air Distribution and Filtering .