Removal And Installation
NOTE:
Removal steps in this procedure may contain installation details.
- 1.
If a new SCCM is being installed, connect the scan tool and upload the module configuration information from the SCCM. For additional information on configuration, refer to PMI in Module Configuration .
- 2.
Remove the steering column shrouds and steering wheel. Refer to Steering Column .
- 5.
To install, reverse the removal procedure.- If a new SCCM was installed, it must be configured (using vehicle as-built data or module configuration information retrieved earlier in this procedure). For additional information on configuration, refer to PMI in Module Configuration .