LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> Navigator L, 4WD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Four Wheel Drive (4WD) Systems >> Removal And Installation >> Transfer Case Shift Motor >> Removal

Transfer Case Shift Motor: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the harness connector.
  3. Remove the coil wire pin from the electrical connector.
    1. Remove the inner retainer from the wire connector.
    2. Press the release tab and remove the coil wire pin.
    Fig 1: Identifying Inner Retainer And Coil Wire Pin
    G06171710Courtesy of FORD MOTOR CO.
  4. Remove the transfer case shift motor bracket bolt and the 3 mounting bolts, then remove the transfer case shift motor.
scientia non olet · About LEMON Manuals