LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKX AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Removal And Installation >> Remote Function Actuator (RFA) Module >> Removal

Remote Function Actuator (RFA) Module: Removal

NOTE: If a new Remote Function Actuator (RFA) module is installed, verify at least 2 of the vehicle keys are available prior to carrying out this procedure.
NOTE: If a new Remote Function Actuator (RFA) module is installed, the ignition does not turn on until a parameter reset is performed and 2 keys are programmed.
  1. NOTE: This step is only necessary if the RFA  module is being replaced.

    Upload the module configuration information from the RFA  module. For additional information, refer to MODULE CONFIGURATION .

  2. Remove the glove compartment. For additional information, refer to INSTRUMENT PANEL - EXPLODED VIEW .
  3. Disconnect the RFA  module electrical connectors.
  4. Remove the 2 nuts and the RFA  module.
scientia non olet · About LEMON Manuals