LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKX AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Removal And Installation >> Remote Function Actuator (RFA) Module >> Installation

Remote Function Actuator (RFA) Module: Installation

  1. Position the RFA  module onto the studs and install the 2 nuts.
  2. Connect the RFA  module electrical connectors.
  3. NOTE: If the RFA  module was not replaced, this is the last step that is necessary.

    Install the glove compartment. For additional information, refer to INSTRUMENT PANEL - EXPLODED VIEW .

  4. Carry out the parameter reset between the RFA  module and the Body Control Module (BCM). For additional information, refer to PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET .
  5. Program the Intelligent Access (IA) keys (minimum of 2) into the new RFA  module. For additional information, refer to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT .
  6. Turn the ignition ON.
  7. Carry out the keyless entry keypad code reset. For additional information, refer to KEYLESS ENTRY KEYPAD CODE PROGRAMMING .
  8. Download the RFA  module configuration information from the scan tool into the new RFA  module. For additional information, refer to MODULE CONFIGURATION .
  9. Carry out the RFA  module self-test to confirm all DTCs have been cleared.
scientia non olet · About LEMON Manuals