Network Message Chart: Acc

To enter ACC mode, with the correct IA  key inside the vehicle, press and release the start/stop switch one time without pressing the brake pedal. Once the BCM  receives the message from the RFA  module that the correct IA  key is present inside the vehicle and the BCM  has detected the start/stop switch input without the BPP  input, the BCM  activates the internal RUN/ACC bus and internal RUN/ACC relay. The BCM  also sends the ignition mode message to the other modules over the MS-CAN  and the HS-CAN  .

Once the ignition has entered ACC mode, the message center displays, PRESS BRAKE TO START and then ACCESSORY POWER ACTIVE.